configure

			  ac_lo= ac_hi=
			  break
			fi
			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
  done
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) < 0)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_hi=-1 ac_mid=-1
  while :; do
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) >= $ac_mid)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_lo=$ac_mid; break
else
  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
			if test $ac_mid -le $ac_hi; then
			  ac_lo= ac_hi=
			  break
			fi
			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
  done
else
  ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
static int test_array [1 - 2 * !(($2) <= $ac_mid)];
test_array [0] = 0;
return test_array [0];

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_hi=$ac_mid
else
  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in #((
?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
'') ac_retval=1 ;;
esac
  else
    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
static long int longval () { return $2; }
static unsigned long int ulongval () { return $2; }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{

  FILE *f = fopen ("conftest.val", "w");
  if (! f)
    return 1;
  if (($2) < 0)
    {
      long int i = longval ();
      if (i != ($2))
	return 1;
      fprintf (f, "%ld", i);
    }
  else
    {
      unsigned long int i = ulongval ();
      if (i != ($2))
	return 1;
      fprintf (f, "%lu", i);
    }
  /* Do not output a trailing newline, as this causes \r\n confusion
     on some platforms.  */
  return ferror (f) || fclose (f) != 0;

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_run "$LINENO"; then :
  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
else
  ac_retval=1
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
  conftest.$ac_objext conftest.beam conftest.$ac_ext
rm -f conftest.val

  fi
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
  as_fn_set_status $ac_retval

} # ac_fn_c_compute_int

# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
# -------------------------------------------------------
# Tests whether HEADER exists, giving a warning if it cannot be compiled using
# the include files in INCLUDES and setting the cache variable VAR
# accordingly.
ac_fn_c_check_header_mongrel ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  if eval \${$3+:} false; then :
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
  $as_echo_n "(cached) " >&6
fi
eval ac_res=\$$3
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
else
  # Is the header compilable?
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
$as_echo_n "checking $2 usability... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
#include <$2>
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  ac_header_compiler=yes
else
  ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
$as_echo "$ac_header_compiler" >&6; }

# Is the header present?
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
$as_echo_n "checking $2 presence... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
#include <$2>
_ACEOF
if ac_fn_c_try_cpp "$LINENO"; then :
  ac_header_preproc=yes
else
  ac_header_preproc=no
fi
rm -f conftest.err conftest.i conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
$as_echo "$ac_header_preproc" >&6; }

# So?  What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
  yes:no: )
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
    ;;
  no:yes:* )
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
( $as_echo "## ------------------------------------------------------------------------ ##
## Report this to http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer ##
## ------------------------------------------------------------------------ ##"
     ) | sed "s/^/$as_me: WARNING:     /" >&2
    ;;
esac
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
$as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
  $as_echo_n "(cached) " >&6
else
  eval "$3=\$ac_header_compiler"
fi
eval ac_res=\$$3
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
fi
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno

} # ac_fn_c_check_header_mongrel
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by GStreamer Good Plug-ins $as_me 1.12.4, which was
generated by GNU Autoconf 2.69.  Invocation command line was

  $ $0 $@

_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##

hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`

/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`

/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`

_ASUNAME

as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    $as_echo "PATH: $as_dir"
  done
IFS=$as_save_IFS

} >&5

cat >&5 <<_ACEOF


## ----------- ##
## Core tests. ##
## ----------- ##

_ACEOF


# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
  for ac_arg
  do
    case $ac_arg in
    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
    | -silent | --silent | --silen | --sile | --sil)
      continue ;;
    *\'*)
      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
    esac
    case $ac_pass in
    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
    2)
      as_fn_append ac_configure_args1 " '$ac_arg'"
      if test $ac_must_keep_next = true; then
	ac_must_keep_next=false # Got value, back to normal.
      else
	case $ac_arg in
	  *=* | --config-cache | -C | -disable-* | --disable-* \
	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
	  | -with-* | --with-* | -without-* | --without-* | --x)
	    case "$ac_configure_args0 " in
	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
	    esac
	    ;;
	  -* ) ac_must_keep_next=true ;;
	esac
      fi
      as_fn_append ac_configure_args " '$ac_arg'"
      ;;
    esac
  done
done
{ ac_configure_args0=; unset ac_configure_args0;}
{ ac_configure_args1=; unset ac_configure_args1;}

# When interrupted or exit'd, cleanup temporary files, and complete
# config.log.  We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
  # Save into config.log some information that might help in debugging.
  {
    echo

    $as_echo "## ---------------- ##
## Cache variables. ##
## ---------------- ##"
    echo
    # The following way of writing the cache mishandles newlines in values,
(
  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
    eval ac_val=\$$ac_var
    case $ac_val in #(
    *${as_nl}*)
      case $ac_var in #(
      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
      esac
      case $ac_var in #(
      _ | IFS | as_nl) ;; #(
      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
      *) { eval $ac_var=; unset $ac_var;} ;;
      esac ;;
    esac
  done
  (set) 2>&1 |
    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
    *${as_nl}ac_space=\ *)
      sed -n \
	"s/'\''/'\''\\\\'\'''\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
      ;; #(
    *)
      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
      ;;
    esac |
    sort
)
    echo

    $as_echo "## ----------------- ##
## Output variables. ##
## ----------------- ##"
    echo
    for ac_var in $ac_subst_vars
    do
      eval ac_val=\$$ac_var
      case $ac_val in
      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
      esac
      $as_echo "$ac_var='\''$ac_val'\''"
    done | sort
    echo

    if test -n "$ac_subst_files"; then
      $as_echo "## ------------------- ##
## File substitutions. ##
## ------------------- ##"
      echo
      for ac_var in $ac_subst_files
      do
	eval ac_val=\$$ac_var
	case $ac_val in
	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
	esac
	$as_echo "$ac_var='\''$ac_val'\''"
      done | sort
      echo
    fi

    if test -s confdefs.h; then
      $as_echo "## ----------- ##
## confdefs.h. ##
## ----------- ##"
      echo
      cat confdefs.h
      echo
    fi
    test "$ac_signal" != 0 &&
      $as_echo "$as_me: caught signal $ac_signal"
    $as_echo "$as_me: exit $exit_status"
  } >&5
  rm -f core *.core core.conftest.* &&
    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
    exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0

# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h

$as_echo "/* confdefs.h */" > confdefs.h

# Predefined preprocessor variables.

cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF

cat >>confdefs.h <<_ACEOF
#define PACKAGE_URL "$PACKAGE_URL"
_ACEOF


# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
  # We do not want a PATH search for config.site.
  case $CONFIG_SITE in #((
    -*)  ac_site_file1=./$CONFIG_SITE;;
    */*) ac_site_file1=$CONFIG_SITE;;
    *)   ac_site_file1=./$CONFIG_SITE;;
  esac
elif test "x$prefix" != xNONE; then
  ac_site_file1=$prefix/share/config.site
  ac_site_file2=$prefix/etc/config.site
else
  ac_site_file1=$ac_default_prefix/share/config.site
  ac_site_file2=$ac_default_prefix/etc/config.site
fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
  test "x$ac_site_file" = xNONE && continue
  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
    sed 's/^/| /' "$ac_site_file" >&5
    . "$ac_site_file" \
      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "failed to load site script $ac_site_file
See \`config.log' for more details" "$LINENO" 5; }
  fi
done

if test -r "$cache_file"; then
  # Some versions of bash will fail to source /dev/null (special files
  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
    case $cache_file in
      [\\/]* | ?:[\\/]* ) . "$cache_file";;
      *)                      . "./$cache_file";;
    esac
  fi
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
  >$cache_file
fi

gt_needs="$gt_needs "
as_fn_append ac_header_list " stdlib.h"
as_fn_append ac_header_list " unistd.h"
as_fn_append ac_header_list " sys/param.h"
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
  eval ac_old_set=\$ac_cv_env_${ac_var}_set
  eval ac_new_set=\$ac_env_${ac_var}_set
  eval ac_old_val=\$ac_cv_env_${ac_var}_value
  eval ac_new_val=\$ac_env_${ac_var}_value
  case $ac_old_set,$ac_new_set in
    set,)
      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,set)
      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
      ac_cache_corrupted=: ;;
    ,);;
    *)
      if test "x$ac_old_val" != "x$ac_new_val"; then
	# differences in whitespace do not lead to failure.
	ac_old_val_w=`echo x $ac_old_val`
	ac_new_val_w=`echo x $ac_new_val`
	if test "$ac_old_val_w" != "$ac_new_val_w"; then
	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
	  ac_cache_corrupted=:
	else
	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
	  eval $ac_var=\$ac_old_val
	fi
	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
      fi;;
  esac
  # Pass precious variables to config.status.
  if test "$ac_new_set" = set; then
    case $ac_new_val in
    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
    *) ac_arg=$ac_var=$ac_new_val ;;
    esac
    case " $ac_configure_args " in
      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
    esac
  fi
done
if $ac_cache_corrupted; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
## -------------------- ##

ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu



ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
  if test -f "$ac_dir/install-sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install-sh -c"
    break
  elif test -f "$ac_dir/install.sh"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/install.sh -c"
    break
  elif test -f "$ac_dir/shtool"; then
    ac_aux_dir=$ac_dir
    ac_install_sh="$ac_aux_dir/shtool install -c"
    break
  fi
done
if test -z "$ac_aux_dir"; then
  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi

# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.


# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
if ${ac_cv_build+:} false; then :
  $as_echo_n "(cached) " >&6
else
  ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_build
shift
build_cpu=$1
build_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
build_os=$*
IFS=$ac_save_IFS
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac


{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
$as_echo_n "checking host system type... " >&6; }
if ${ac_cv_host+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test "x$host_alias" = x; then
  ac_cv_host=$ac_cv_build
else
  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
$as_echo "$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_host
shift
host_cpu=$1
host_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
host_os=$*
IFS=$ac_save_IFS
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac


{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
$as_echo_n "checking target system type... " >&6; }
if ${ac_cv_target+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test "x$target_alias" = x; then
  ac_cv_target=$ac_cv_host
else
  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
fi

fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
$as_echo "$ac_cv_target" >&6; }
case $ac_cv_target in
*-*-*) ;;
*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
esac
target=$ac_cv_target
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_target
shift
target_cpu=$1
target_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
target_os=$*
IFS=$ac_save_IFS
case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac


# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
  test "$program_prefix$program_suffix$program_transform_name" = \
    NONENONEs,x,x, &&
  program_prefix=${target_alias}-




am__api_version='1.15'

# Find a good install program.  We prefer a C program (faster),
# so one script is as good as another.  But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
if ${ac_cv_path_install+:} false; then :
  $as_echo_n "(cached) " >&6
else
  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    # Account for people who put trailing slashes in PATH elements.
case $as_dir/ in #((
  ./ | .// | /[cC]/* | \
  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
  /usr/ucb/* ) ;;
  *)
    # OSF1 and SCO ODT 3.0 have their own names for install.
    # Don't use installbsd from OSF since it installs stuff as root
    # by default.
    for ac_prog in ginstall scoinst install; do
      for ac_exec_ext in '' $ac_executable_extensions; do
	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
	  if test $ac_prog = install &&
	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
	    # AIX install.  It has an incompatible calling convention.
	    :
	  elif test $ac_prog = install &&
	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
	    # program-specific install script used by HP pwplus--don't use.
	    :
	  else
	    rm -rf conftest.one conftest.two conftest.dir
	    echo one > conftest.one
	    echo two > conftest.two
	    mkdir conftest.dir
	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
	      test -s conftest.one && test -s conftest.two &&
	      test -s conftest.dir/conftest.one &&
	      test -s conftest.dir/conftest.two
	    then
	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
	      break 3
	    fi
	  fi
	fi
      done
    done
    ;;
esac

  done
IFS=$as_save_IFS

rm -rf conftest.one conftest.two conftest.dir

fi
  if test "${ac_cv_path_install+set}" = set; then
    INSTALL=$ac_cv_path_install
  else
    # As a last resort, use the slow shell script.  Don't cache a
    # value for INSTALL within a source directory, because that will
    # break other packages using the cache if that directory is
    # removed, or if the value is a relative name.
    INSTALL=$ac_install_sh
  fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }

# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'

test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'

test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'

{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
# Reject unsafe characters in $srcdir or the absolute working directory
# name.  Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
  *[\\\"\#\$\&\'\`$am_lf]*)
    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
esac
case $srcdir in
  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac

# Do 'set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   am_has_slept=no
   for am_try in 1 2; do
     echo "timestamp, slept: $am_has_slept" > conftest.file
     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
     if test "$*" = "X"; then
	# -L didn't work.
	set X `ls -t "$srcdir/configure" conftest.file`
     fi
     if test "$*" != "X $srcdir/configure conftest.file" \
	&& test "$*" != "X conftest.file $srcdir/configure"; then

	# If neither matched, then we have a broken ls.  This can happen
	# if, for instance, CONFIG_SHELL is bash and it inherits a
	# broken ls alias from the environment.  This has actually
	# happened.  Such a system could not be considered "sane".
	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
  alias in your environment" "$LINENO" 5
     fi
     if test "$2" = conftest.file || test $am_try -eq 2; then
       break
     fi
     # Just in case.
     sleep 1
     am_has_slept=yes
   done
   test "$2" = conftest.file
   )
then
   # Ok.
   :
else
   as_fn_error $? "newly created file is older than distributed files!
Check your system clock" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
# If we didn't sleep, we still need to ensure time stamps of config.status and
# generated files are strictly newer.
am_sleep_pid=
if grep 'slept: no' conftest.file >/dev/null 2>&1; then
  ( sleep 1 ) &
  am_sleep_pid=$!
fi

rm -f conftest.file

test "$program_prefix" != NONE &&
  program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
# Double any \ or $.
# By default was `s,x,x', remove it if useless.
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`

# Expand $ac_aux_dir to an absolute path.
am_aux_dir=`cd "$ac_aux_dir" && pwd`

if test x"${MISSING+set}" != xset; then
  case $am_aux_dir in
  *\ * | *\	*)
    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
  *)
    MISSING="\${SHELL} $am_aux_dir/missing" ;;
  esac
fi
# Use eval to expand $SHELL
if eval "$MISSING --is-lightweight"; then
  am_missing_run="$MISSING "
else
  am_missing_run=
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi

if test x"${install_sh+set}" != xset; then
  case $am_aux_dir in
  *\ * | *\	*)
    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
  *)
    install_sh="\${SHELL} $am_aux_dir/install-sh"
  esac
fi

# Installed binaries are usually stripped using 'strip' when the user
# run "make install-strip".  However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
  if test -n "$ac_tool_prefix"; then
  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_STRIP+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$STRIP"; then
  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi


fi
if test -z "$ac_cv_prog_STRIP"; then
  ac_ct_STRIP=$STRIP
  # Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
  $as_echo_n "(cached) " >&6
else
  if test -n "$ac_ct_STRIP"; then
  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
    for ac_exec_ext in '' $ac_executable_extensions; do
  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_ac_ct_STRIP="strip"
    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
  done
IFS=$as_save_IFS

fi